Fortech® 25 Grand™ Cross Linked Floor Finish - Gal.

Item # FT 31701

A revolutionary change in the way you look at floor finishes. Maximizes durability without sacrificing gloss. Outperforms competition w/greater durability & gloss. Application is Goof Proof w/superior leveling & no mop drag. A hard film with excellent UHS responsiveness to spray buffing or restoring. Slip resistant and meets or exceeds ASTM specifications.

Alternate #FT31704
  • Specifications
  • Resources

Directions For Use

  • Before using, read Material Safety Data Sheet for this material.

Floor Preparation

  • 1. Thoroughly strip floor with any Fortech's floor strippers according to directions.
  • 2. After stripping, make sure floor is clean and residue free.


  • 1. Using a clean mop bucket lined with a trash can liner to prevent contamination, pour 25 Grand[TM] into the mop bucket.
  • 2. Using a clean finish mop, saturate with finish. Place the mop in the wringer and use your weight to press down to remove excess finish.
  • 4. Apply finish to the floor in medium coats.
  • 5. Allow each coat to dry a minimum of 20 - 30 minutes.
  • 6. Apply multiple coats until desired gloss is achieved. (3-5 coats)

Daily Maintenance

  • 1. Dust mop entire floor surface.
  • 2. Using a clean mop & bucket, mix any of Fortech's[R] neutral pH cleaners and/or disinfectants according to directions.
  • 3. Damp mop floor as needed. No rinsing required.


  • 1. Make sure the floor is completely clean and dry before burnishing. Use Fortech[R] Reclaim[TM] according to directions.

Technical Data

  • Form: Liquid
  • Color: Milky white
  • Specific Gravity @75F: 1.032
  • pH: 8.4 - 8.8
  • Nonvolatile Solids: 25% +/-0.3%
  • Stability: 1 year minimum
  • Density @ 75F: 8.6 lbs per gallon
  • Stability @ 45C: 60 days minimum
  • Slip Resistance: Meets ASTM D 2047
  • HMIS Rating: Flammability 0, health 1, reactivity 0, personal protection B.