Fortech® Secure™ Floor Sealer & Finish Combo - Gal.

Item # FT 31601

  • Stain resistant floor sealer & finish. Provides superior durability and satin gloss with exceptional leveling properties. Can be used as a floor finish.
  • Slip resistant and meets or exceeds ASTM specifications
Alternate #FT31604
  • Description
  • Specifications
  • Resources

Utilizes the latest formulation technology to provide stain protective properties in a combinations seal & finish for all types of resilient tile, terrazzo, concrete and quarry tile.

Like Having Three Products in One

  • 1. A stain barrier seal that has the capability of resisting the passage of stain causing agents: coal tar, asphalt, anti-oxidants, etc which can damage the floor.
  • 2. A leveling sealer that provides a good base for multiple top coats of ultra high speed floor finish.
  • 3. Because of it's superior durability and satin gloss, Secure[TM] can be used as a top coat finish for money and labor saving economy.
  • Stain resistant against: Asphalt/coal tar, mustard, ketchup, coffee/tea, lipstick, rust, shoe polish and neozone (floor mat backing).

Directions For Use

  • Before using, read Material Safety Data Sheet for this material.
  • Thoroughly strip all old wax and seal from the floor using any one of Fortech[R] products floor strippers according to the directions.
  • 2. After stripping, rinse the floor thoroughly to insure a clean, film free surface.
  • 3. Apply Secure[TM] in a uniform, thin coat using a clean finish mop. If you are using a mop and bucket, line the bucket first with a new trash can liner to prevent contamination from any existing bucket residue.
  • 4. Allow to dry for a minimum of 30 minutes. If floor has an uneven appearance, apply a second coat.
  • 5. At this point, multiple coats of Secure[TM] can be applied for a "hard as nails" finish. Secure[TM] can be top coated with any one of Fortech's[R] floor finishes.

Technical Data

  • Form: Liquid
  • Color: Milky white
  • Specific Gravity @75F: 1.01
  • pH: 8.5 - 9.0
  • Nonvolatile Solids: 20.0% +/-0.3%
  • Total Solids: 28.7
  • Slip Resistance: Meets ASTM D 2047
  • HMIS Rating: Flammability 0, health 1, reactivity 0, personal protection B.