Fortech® Dynamite™ Wax & Finish Stripper - Gal.

Item # FT 30101

Formulated to remove long-term build-up of all water based waxes & synthetic polymer floor finishes including metal interlocked detergent-resistant finishes. Can be used as an economical & effective industrial cleaner. May be sprayed, brushed, or mopped on and can also be used in conjunction with pressure sprayers, steam cleaning equipment, and automatic scrubbers.

Alternate #FT30104
  • Specifications
  • Resources


  • It penetrates, reacts, and suspends greasy soil and wax in solution for easy rinsing.
  • Contains MEA, which in combination with its other solvents and detergent-based ingredients, quickly penetrates, emulsifies and suspends built up wax and finish.

Directions For Use

  • Before using, read Material Safety Data Sheet for this material.
  • 1. Depending on build up dilute stripper from 1:4 to 1:16 with hot water.
  • 2. Apply diluted stripper generously to small areas. Solution should stand approximately 5-10 minutes. Do not allow to dry.
  • 3. Scrub with floor machine using a stripping pad. Use a scrubbing pad and long handled scraper along edges.
  • 4. Pick up reside using wet vacuum.
  • 5. Immediately flood rinse with clear water and vacuum. Repeat. Scrubbing during the first water rinse is helpful.
  • 6. When dry, check for missed areas and restrip.
  • 7. Apply Fortech[R] Secure[TM] floor sealer and finish when clean and dry if desired. (NOTE: Autoscrubbers use the double pass system (Scrub/flood/scrub/pick-up).

Technical Data

  • Color: Red
  • Odor: Pleasant
  • Specific Gravity @ 75F: 1.05
  • Density @ 75F: 8.7 lbs/gallon
  • pH: 13.0
  • Viscosity @ 75F: Non-viscous
  • Flash Point: None
  • Stability: 1 year minimum
  • Freeze/Thaw Stability: 3 Cycles Minimum
  • pH 1% Solution: 12.2
  • Solvents: Glycol Ethers
  • Phosphates: None
  • HMIS Rating: Flammability 0, health 2, reactivity 0, personal protection B